FIN: (12HA1) RELAY-CTL, ENG 1 HP BLEED OVRD SOL

Zone: 121 Panel: 95VU

AMM TASK

ENGINE BLEED AIR SUPPLY SYSTEM
- 36-11-00-615-805-A
  Decontamination of the Bleed-Air Ducting System Disconnected at Pressure Regulating Valve (PRV) (4000HA2) with Engine 1 Bleed Pressure
- 36-11-00-615-805-A-01
  Decontamination of the Bleed-Air Ducting System Disconnected at Pressure Regulating Valve (PRV) (4000HA1) with Engine 2 Bleed Pressure
- 36-11-00-615-805-A-02
  Decontamination of the Bleed-Air Ducting System Disconnected at Pressure Regulating Valve (PRV) (4000HA2) with Engine 1 Bleed Pressure and the TCT P/N SBE2272
- 36-11-00-615-805-A-03
  Decontamination of the Bleed-Air Ducting System Disconnected at Pressure Regulating Valve (PRV) (4000HA1) with Engine 2 Bleed Pressure and the TCT P/N SBE2272
- 36-11-00-615-801-A
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 1 Bleed Pressure
- 36-11-00-615-801-A-01
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 2 Bleed Pressure
- 36-11-00-615-801-A-02
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 1 Bleed Pressure and the TCT P/N SBE2272
- 36-11-00-615-801-A-03
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 2 Bleed Pressure and the TCT P/N SBE2272
- 36-11-00-615-804-A
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 1 Bleed Pressure
- 36-11-00-615-804-A-01
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 2 Bleed Pressure
- 36-11-00-615-806-A
  Decontamination of the Bleed-Air Ducting System disconnected at the Pressure Regulating Valve (PRV) (4000HA2) with ENGINE 1 Bleed Pressure
- 36-11-00-615-806-A-01
  Decontamination of the Bleed-Air Ducting System disconnected at the Pressure Regulating Valve (PRV) (4000HA1) with ENGINE 2 Bleed Pressure
- 36-11-00-610-801-A
  Uploading of the Bleed Monitoring Computer (BMC) Data
- 36-11-00-040-001-A
  Deactivation of the Bleed Pressure Regulator Valve
- 36-11-00-440-001-A
  Reactivation of the Bleed Pressure Regulator Valve
- 36-11-00-040-002-A
  Deactivation of the HP Bleed Valve in the CLOSED Position to Isolate the IP Bleed Check-Valve
- 36-11-00-440-002-A
  Reactivation of the HP Bleed Valve to Make serviceable the IP Bleed Check-Valve
- 36-11-00-040-003-A
  Deactivation of the HP Bleed Valve (HPV)
- 36-11-00-440-003-A
  Reactivation of the HP Bleed Valve (HPV)
- 36-11-00-040-004-A
  Check of the CFDS to Make Sure that the Pylon Leak Detection and APU Leak Detection Operates Correctly
- 36-11-00-040-807-A
  Check of the CFDS to Make Sure that the Pylon Leak Detection and APU Leak Detection Loop Operates Correctly in LH Side
- 36-11-00-040-808-A
  Check of the CFDS to Make Sure that the Pylon Leak Detection Operates Correctly in RH Side
- 36-11-00-040-803-A
  Deactivation of the Bleed Valve
- 36-11-00-040-804-A
  Deactivation of the HP Bleed Valve
- 36-11-00-440-802-A
  Reactivation of the Bleed Valve
- 36-11-00-440-803-A
  Reactivation of the HP Bleed Valve
- 36-11-00-040-806-A
  Deactivation of the HP Bleed Valve in the CLOSED Position to Isolate the IP Bleed Check-Valve
- 36-11-00-440-805-A
  Reactivation of the HP Bleed Valve to MAKE serviceable the IP Bleed Check-Valve
- 36-11-00-710-806-A
  Operational Test of the Bleed Air System with the APU running and the Engines at Idle
- 36-11-00-710-001-A
  Operational Test to read the CURRENT STATUS of the Engine Bleed Air System
- 36-11-00-710-002-A
  Operational Test to Read the CLASS III FAULTS
- 36-11-00-710-003-A
  Operational Test of the Bleed Air System
- 36-11-00-740-001-A
  BITE Test of the BMC 1(2)
- 36-11-00-710-005-A
  Operational Test of Closing Signal to Temperature Limitation Thermostat Solenoid from Engine Fire Pushbutton
- 36-11-00-720-004-A
  Leak Check of Engine Bleed Air Supply System and Packs Components through HPGC
- 36-11-00-720-005-A
  Leak Check of Engine Bleed Air Supply System and Packs Components with APU Bleed Air
- 36-11-00-720-007-A-01
  Functional Test of the Sense Lines Connected to the Bleed Pressure-Regulator Valve with the Bleed Test Set P/N 98L36103002000
- 36-11-00-790-002-A
  Perform Leak Check on the Combo Seals on the Pylon Duct Sleeves (Downstream Precooler)
- 36-11-00-790-002-A-01
  Perform Leak Check on the Combo Seals on the Pylon Duct Sleeves (Downstream Precooler)
- 36-11-00-720-008-A
  Functional Test of the Sense Line Connected between the HP Bleed Valve and the Bleed-Pressure Regulator Valve with the Bleed Test Set P/N 99127B03
- 36-11-00-720-008-A-01
  Functional Test of the Sense Line between the HP Bleed Valve and the Bleed- Pressure Regulator Valve with the Test Set P/N 98L36103002000 and P/N SBE2213
- 36-11-00-720-009-A
  Functional Test of the Sense Line Connected Upstream of the Bleed-Pressure Regulator Valve with the Bleed Test Set P/N 99127B03
- 36-11-00-720-009-A-01
  Functional Test of the Sense Line Connected Upstream of the Bleed-Pressure Regulator Valve with the Test Set 98L36103002000 and Tester Kit SBE2213
- 36-11-00-720-010-A
  Functional Test of the Sense Line between the Pressure Regulator Valve and the Pressure-Regulator Valve Control-Solenoid with the Bleed Test Set P/N 99127B03
- 36-11-00-720-010-A-01
  Functional Test of the Sense Line between the Pressure Regulator Valve (PRV) and the PRV Control Solenoid with the 98L36103002000 and SBE2213
- 36-11-00-720-011-A
  Functional Test of the Sense Line Connected between the Bleed Regulated Pressure-Transducer and the Duct Assy with the Bleed Test Set P/N 99127B03
- 36-11-00-720-011-A-01
  Functional Test of the Sense Line Connected between the Bleed Regulated Pressure-Transducer and the Duct Assy with 98L36103002000 and SBE2213
- 36-11-00-720-012-A
  Functional Test of the Sense Line Connected between the Fan-Air Valve Control-Thermostat and the Fan Air Valve (FAV) with the Bleed Test Set P/N 99127B03
- 36-11-00-720-012-A-01
  Functional Test of the Sense Line Connected between the Fan-Air Valve Control-Thermostat and the Fan Air Valve (FAV) with 98L36103002000 and SBE2213
- 36-11-00-720-013-A
  Functional Test of the Sense Line Connected between the Bleed-Pressure Regulator Valve and the Duct Assy with the Bleed Test Set P/N 99127B03
- 36-11-00-720-013-A-01
  Functional Test of the Sense Line Connected between the Bleed-Pressure Regulator Valve and the Duct Assy with 98L36103002000 and SBE2213
- 36-11-00-720-802-A
  Health Check Procedure - Temperature Control Function
- 36-11-00-720-802-A-01
  Health Check Procedure - Temperature Control Function with the Bleed Test Set P/N 98L36103002000
- 36-11-00-720-804-A
  Health Check Procedure - Pressure Regulation Function
- 36-11-00-720-804-A-01
  Health Check Procedure - Pressure Regulation Function with the Bleed Test Set P/N 98L36103002000
- 36-11-00-720-806-A
  Health Check Procedure - Pressure Control Function
- 36-11-00-720-806-A-01
  Health Check Procedure - Pressure Control Function with the Bleed Test Set P/N 98L36103002000
- 36-11-00-720-810-A
  Pressure Regulating Test after Overpressure at Take Off Events with Bleed Test Set P/N 98L36103002000
- 36-11-00-720-810-A-01
  Pressure Regulating Test after Overpressure at Take Off Events with Bleed Test Set P/N 99127B03
- 36-11-00-720-808-A
  Leak Check of the RH Wing using Bleed Air from the opposite Engine 1
- 36-11-00-720-809-A
  Leak Check of the LH Wing using Bleed Air from the opposite Engine 2
- 36-11-00-720-819-A
  Functional Check of the Pressure Regulating Valve (PRV) Control-Solenoid (10HA1, 10HA2) Non-Return-Function with the HP ground cart and the Bleed Test Set P/N 99127B03
- 36-11-00-720-819-A-02
  Functional Check of the Pressure Regulating Valve (PRV) Control-Solenoid (10HA1, 10HA2) Non-Return-Function with the Engine Running
- 36-11-00-710-804-A
  Operational Test of the Bleed Air System with the APU running and the Engines at Idle
- 36-11-00-740-802-A
  BITE Test of the Engine Bleed Air System (EBAS) (System Test)
- 36-11-00-710-802-A
  Operational Test of the Bleed Air System
- 36-11-00-740-805-A
  Drift Test of the Pressure Sensor
- 36-11-00-740-806-A
  Emergency Protection Function (EPF) Test
- 36-11-00-740-809-A
  Ground Scanning Test
- 36-11-00-740-810-A
  Overheat Electrical Test
- 36-11-00-790-002-B
  Perform Leak Check on the Combo Seals on the Pylon Duct Sleeves (Downstream Precooler)
- 36-11-00-790-002-B-01
  Perform Leak Check on the Combo Seals on the Pylon Duct Sleeves (Downstream Precooler)
- 36-11-00-790-806-A
  Leak Test of the Bleed Pressure Sensor (BPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-790-807-A
  Leak Test of the Bleed Monitoring Pressure Sensor (BMPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-790-811-A
  Leak Test of the Differential Pressure Sensor (DPS) Sense Lines with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-200-002-A
  Inspection of the Bleed Air Cold Flow Path after Hail and Bird Strike
- 36-11-00-210-801-A
  Visual Inspection of the Bleed Air-Duct System After the Damage of APU Inlet Guide Vane
- 36-11-00-210-806-A
  Visual Inspection of the Engine Bleed Air System (EBAS) after the Damage of the Engine Compressor
- 36-11-00-210-808-A
  Visual Inspection of the Engine Bleed Air System (EBAS) after the Failure of the High Pressure Valve (HPV)
- 36-11-00-200-802-A
  Inspection of the Bleed Air Cold Flow Path After Hail and Bird Strike
- 36-11-00-210-803-A
  Visual Inspection of the Bleed-Air Duct System After the Damage of APU Inlet Guide Vane
- 36-11-00-100-803-A
  Cleaning of the Differential Pressure Sensor (DPS) Sense Lines with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-100-804-A
  Cleaning of the Bleed Pressure Sensor (BPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-100-805-A
  Cleaning of the Bleed Monitoring Pressure Sensor (BMPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-615-807-A
  Decontamination of the Bleed-Air Ducting System Disconnected at Pressure Regulating Valve (PRV) (4000HA2) with ENGINE 1 Bleed Pressure
- 36-11-00-615-807-A-01
  Decontamination of the Bleed-Air Ducting System Disconnected at Pressure Regulating Valve (PRV) (4000HA1) with ENGINE 2 Bleed Pressure
- 36-11-00-615-802-A
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 1 Bleed Pressure
- 36-11-00-615-802-A-01
  Decontamination of the Bleed-Air Ducting System Disconnected at HP Ground Connector with Engine 2 Bleed Pressure
- 36-11-00-610-802-A
  Uploading of the Bleed Monitoring Computer (BMC) Data
- 36-11-00-040-809-A
  Deactivation of the Bleed Pressure-Regulator Valve
- 36-11-00-040-810-A
  Deactivation of the HP Bleed Valve in the CLOSED Position to Isolate the IP Bleed Check-Valve
- 36-11-00-040-811-A
  Deactivation of the HP Bleed Valve
- 36-11-00-040-812-A
  Deactivation of the Overpressure Valve
- 36-11-00-440-806-A
  Reactivation of the Bleed Pressure-Regulator Valve
- 36-11-00-440-807-A
  Reactivation of the HP Bleed Valve to Make the IP Bleed Check-Valve Serviceable
- 36-11-00-440-808-A
  Reactivation of the HP Bleed Valve
- 36-11-00-440-809-A
  Reactivation of the Overpressure Valve
- 36-11-00-710-805-A
  Operational Test of the Bleed Air System with the APU Running and the Engines at Idle
- 36-11-00-740-804-A
  BITE Test of the Engine Bleed Air System (EBAS) (System Test)
- 36-11-00-710-803-A
  Operational Test of the Bleed Air System
- 36-11-00-740-807-A
  Drift Test of the Pressure Sensor
- 36-11-00-740-808-A
  Emergency Protection Function (EPF) Test
- 36-11-00-740-811-A
  Ground Scanning Test
- 36-11-00-740-812-A
  Overheat Electrical Test
- 36-11-00-790-002-C
  Perform Leak Check on the Combo Seals on the Pylon Duct Sleeves (Downstream Precooler)
- 36-11-00-790-002-C-01
  Perform Leak Check on the Combo Seals on the Pylon Duct Sleeves (Downstream Precooler)
- 36-11-00-790-808-A
  Leak Test of the Bleed Pressure Sensor (BPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-790-810-A
  Leak Test of the Differential Pressure Sensor (DPS) Sense Lines with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-790-809-A
  Leak Test of the Bleed Monitoring Pressure Sensor (BMPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-210-805-A
  Visual Inspection of the Engine Bleed Air System (EBAS) after the Damage of the Engine Compressor
- 36-11-00-210-807-A
  Visual Inspection of the Engine Bleed Air System (EBAS) after the Failure of the High Pressure Valve (HPV)
- 36-11-00-200-804-A
  Inspection of the Bleed-Air Cold Flow-Path after Hail or Bird Strike
- 36-11-00-210-802-A
  Visual Inspection of the Bleed-Air Duct System After the Damage of APU Inlet Guide Vane
- 36-11-00-100-802-A
  Cleaning of the Differential Pressure Sensor (DPS) Sense Lines with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-100-806-A
  Cleaning of the Bleed Pressure Sensor (BPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000
- 36-11-00-100-807-A
  Cleaning of the Bleed Monitoring Pressure Sensor (BMPS) Sense Line with the Bleed Test Set P/N 98L36103002000 and the Adaptor Kit P/N 98D36109004000

IPC FIGURE

FIGURES
- 36-11-08-03-010 JACK INSTL

FIN: (12HA1) RELAY-CTL, ENG 1 HP BLEED OVRD SOL

AMM TASK

IPC FIGURE

SIMILAR FINs