Removal of the Ball Mount

TASK 46-26-94-000-801-A
Removal of the Ball Mount

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
0621-01-A6064	1	UNLOCK AEROCONSEIL DEVICE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
Ball Mount

3. Job Set-up
Subtask 46-26-94-861-050-A ** ON A/C NOT FOR ALL

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

4. Procedure
Subtask 46-26-94-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Ball Mount
(1) Remove the screws (3).
(2) Remove the ball mount (1).
(3) Remove the setscrew (2) and the limiter ring (12).

Subtask 46-26-94-020-052-A ** ON A/C NOT FOR ALL

B. Removal of the Mobile Lock System (if necessary)
(1) Remove the indexing plunger (8).
(2) Remove the locking screw (6) with the 0621-01-A6064 UNLOCK AEROCONSEIL DEVICE (7).
(3) Move the mobile lock (5) to the top position.

Subtask 46-26-94-020-053-A ** ON A/C NOT FOR ALL

C. Removal of the Clip Used for the Nav Chart (if necessary)
(1) Remove the screws (11).
(2) Remove the protect clip support (10), the clip support (9) and the clip (4).

[Rev.10 from 2021] 2026.04.02 06:26:10 UTC