Operational Test of the PED Power System

TASK 46-26-90-700-802-A
Operational Test of the PED Power System

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power

3. Job Set-up
Subtask 46-26-90-861-059-A ** ON A/C NOT FOR ALL

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

Subtask 46-26-90-875-050-B ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
122VU	EFB/LEFT	9002TA	U09
122VU	EFB/RIGHT	9001TA	U08

4. Procedure
Subtask 46-26-90-710-053-A ** ON A/C NOT FOR ALL

A. Operational Test of the (CAPT or F/O) PED Power System
(1) On the PED, make sure that the battery charge is correct.
(2) On the PED side, do a check of the battery load and record it.
(3) Keep the PED energized for 20 minutes.
(4) Make sure that the battery load did not decrease.

5. Close-up
Subtask 46-26-90-410-059-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.

Subtask 46-26-90-862-058-A ** ON A/C NOT FOR ALL

B. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.04.02 06:26:10 UTC