Check of the Flight Operations and MAintenance eXchanger (FOMAX) Configuration with the Local Maintenance Function (LMF)

TASK 46-26-32-280-801-A-01
Check of the Flight Operations and MAintenance eXchanger (FOMAX) Configuration with the Local Maintenance Function (LMF)

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 46-26-32-860-801-A	Connection of the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) to the Flight Operations and MAintenance eXchanger (FOMAX)
TASK 46-26-32-860-806-A	Disconnection of the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) from the Flight Operations and MAintenance eXchanger (FOMAX)

3. Job Set-up
Subtask 46-26-32-861-061-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

Subtask 46-26-32-865-064-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	FOMAX	67TA	J01

Subtask 46-26-32-860-065-A ** ON A/C NOT FOR ALL

C. Connect the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) to the FOMAX (Ref. AMM TASK 46-26-32-860-801).

4. Procedure
Subtask 46-26-32-280-054-A ** ON A/C NOT FOR ALL

A. Check of the FOMAX Configuration with the LMF

ACTION	RESULT
1.Make sure that you started the LMF on the maintenance electronic device that is connected to the FOMAX.
2.On the LMF Main page: Click "FOMAX Internal".	On the LMF: The "FOMAX Internal" page comes into view.
3.On the LMF, on the "FOMAX Internal" page: Click "CONFIG".	On the LMF: The FINs and the P/Ns of the FOMAX hardware and FOMAX software come into view.

5. Close-up
Subtask 46-26-32-860-067-A ** ON A/C NOT FOR ALL

A. Disconnect the Maintenance Electronic Device (with the Local Maintenance Function (LMF)) from the FOMAX (Ref. AMM TASK 46-26-32-860-806).

Subtask 46-26-32-862-061-A ** ON A/C NOT FOR ALL

B. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.02 06:26:08 UTC