Removal of the Cockpit Voice Recorder (CVR) Rack
TASK 23-71-35-000-002-A
Removal of the Cockpit Voice Recorder (CVR) Rack
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 23-71-35-860-050-A ** ON A/C NOT FOR ALL Subtask 23-71-35-010-052-A ** ON A/C NOT FOR ALL
Subtask 23-71-35-020-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:12:19 UTC
Removal of the Cockpit Voice Recorder (CVR) Rack
WARNING:
PUT WARNING NOTICES IN THE COCKPIT TO TELL PERSONS NOT TO OPERATE THE FLIGHT CONTROLS.
THE MOVEMENT OF THE TRIMMABLE HORIZONTAL STABILIZER (THS) CAN CAUSE INJURY TO PERSONS.
ZONE: 312
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE |
| No specific | 1 | CAP - BLANKING |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 312 | AFT FUSLG TAIL SECTION |
| 312AR |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 23-71-35-000-001-A | Removal of the Cockpit Voice Recorder (CVR) |
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 23-71-00-00 | COCKPIT VOICE RECORDER (CVR) - DESCRIPTION AND OPERATION |
Subtask 23-71-35-860-050-A ** ON A/C NOT FOR ALL Subtask 23-71-35-010-052-A ** ON A/C NOT FOR ALL
B. Get Access
(1) For the location of this component refer to (Ref. AMM D/O 23-71-00-00).
(2) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zone 312.
(3) Open access door 312AR.
(4) Remove the CVR (Ref. AMM TASK 23-71-35-000-001).
4. Procedure(1) For the location of this component refer to (Ref. AMM D/O 23-71-00-00).
(2) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zone 312.
(3) Open access door 312AR.
(4) Remove the CVR (Ref. AMM TASK 23-71-35-000-001).
Subtask 23-71-35-020-053-A ** ON A/C NOT FOR ALL
A. Removal of the Cockpit-Voice-Recorder (CVR) Rack
(1) For the CVR rack with part number S4416F01:
(a) Remove the nuts (14), the washers (13), the screws (12) and the electrical connector (18) from the CVR rack (19).
(b) Put CAP - BLANKING on the disconnected electrical connector(s) and receptacle(s).
(c) Remove the nuts (17), the screws (15), the washers (16) and the CVR rack (19).
(2) For the other types of the CVR rack:
(a) Remove the nuts (11), the screws (9) and the washers (10) and release the electrical connector (6).
(b) Remove the screws (8) and the CVR-Rack (5).
(c) Remove the nuts (4), the washers (3) and the screws (2).
(d) Remove the dampers (1) and the bonding straps (7).
Subtask 23-71-35-020-053-B ** ON A/C NOT FOR ALL (1) For the CVR rack with part number S4416F01:
(a) Remove the nuts (14), the washers (13), the screws (12) and the electrical connector (18) from the CVR rack (19).
(b) Put CAP - BLANKING on the disconnected electrical connector(s) and receptacle(s).
(c) Remove the nuts (17), the screws (15), the washers (16) and the CVR rack (19).
(2) For the other types of the CVR rack:
(a) Remove the nuts (11), the screws (9) and the washers (10) and release the electrical connector (6).
(b) Remove the screws (8) and the CVR-Rack (5).
(c) Remove the nuts (4), the washers (3) and the screws (2).
(d) Remove the dampers (1) and the bonding straps (7).
A. Removal of the CVR Rack
(1) Remove the nuts (3), washers (2), screws (1) and electrical connector (7) from the CVR rack (8).
(2) Put CAP - BLANKING on the disconnected electrical connector(s) and receptacle(s).
(3) Remove the nuts (6), screws (4), washers (5) and CVR rack (8).
(1) Remove the nuts (3), washers (2), screws (1) and electrical connector (7) from the CVR rack (8).
(2) Put CAP - BLANKING on the disconnected electrical connector(s) and receptacle(s).
(3) Remove the nuts (6), screws (4), washers (5) and CVR rack (8).
Cockpit Voice Recorder (CVR) Rack