DOC AIRBUS | AMM A320FAttachment Components (In-Service Wear Limits) - Air Duct
TASK 21-51-51-200-002-A
Attachment Components (In-Service Wear Limits) - Air Duct
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 21-51-51-010-058-A ** ON A/C NOT FOR ALL
Subtask 21-51-51-210-053-C ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:11:23 UTC
Attachment Components (In-Service Wear Limits) - Air Duct
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
Attachment ComponentsSubtask 21-51-51-010-058-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Make sure that the applicable components are disassembled to do the inspection procedure.
4. Procedure(1) Make sure that the applicable components are disassembled to do the inspection procedure.
Subtask 21-51-51-210-053-C ** ON A/C NOT FOR ALL
A. Visual Inspection of the Spherical Bearings in the Air-Duct Support-Rods
(1) Use an applicable measurement method and do a check for radial and axial play at the spherical bearings (2) in the support rods (5).
(a) If you find more than 0.05 mm (0.0020 in.) radial play or more than 0.2 mm (0.0079 in.) axial play in a spherical bearing (2) then you must replace the support rod (5).
(1) Use an applicable measurement method and do a check for radial and axial play at the spherical bearings (2) in the support rods (5).
(a) If you find more than 0.05 mm (0.0020 in.) radial play or more than 0.2 mm (0.0079 in.) axial play in a spherical bearing (2) then you must replace the support rod (5).